A worker must first sharpen his tools if he wants to do his job well, and a lot of good equipment is needed to make a solid floor.   To be like grinding the ground into a mirror, a good "grindstone" is indispensable. the HTG-800-4A self-propelled floor grinder is a piece of good equipment for polishing the floor. The powerful power can also walk on the ground on irregular floors; the four-headed planets counter-rotating the grinding disc, even if it is as solid as a rock; It is easier for people to free themselves from machines. What should I do if the dust is flying when I grind the ground? Xingyi HTG-IVC55A automatic industrial vacuum cleaner and HTG-800-4A floor grinder are matched with each other to achieve dust-free construction during the work process to protect the health of employees. The finished floor is finally applied with an HTG-700-HP high-speed polishing machine to add a protective layer to the floor, making it smoother, shinier and more durable.    Xingyi makes floor work easier and happier.

The floor industry has the characteristics of high labor intensity, complex and changeable construction environment, and open-air operation. Work-related accidents occur from time to time. It is very important to pay attention to the details of the construction process. Xingyi people summarize the following details based on the actual process: 1. The floor grinder must be driven by electricity. The wire has become a major obstacle on the construction site. The layout of the wire will affect the construction efficiency. When grinding the ground, you should grind the ground according to the # character, which is more convenient for grinding. When grinding the ground according to the # character, the direction of the grinder should be such that the wire is pulled farther and farther, so as to further prevent the wire from interfering with the normal operation of the grinder. 2. Remote control driven floor grinder, a remote control can easily control the mechanical work. Please reset the button before use. Make sure that the power of the remote control is at least 20% during the grinding operation. The grinding route should avoid the wire to avoid accidents. 3. During the grinding process, the abrasive needs to be replaced according to different situations. Before changing the abrasive, be sure to press the emergency stop switch of the remote control. After tilting the device, ensure that the device is parked smoothly. Pay attention to safety during the ground grinding construction process to protect life and health. Start with small things and start now.

The grinding work in surface of ramp floor is very laborious. When a heavy grinder is working on a ramp,  it needs several people to control and assist the operation. The grinder may slide down the ramp as a distraction from the operator, which is full of danger and labor-intensive. The HTG-800-4A self-propelled floor grinder from Xingyi has strong power and can grind on uneven ground, providing a stable foundation for uphill walking. With the combination of its own sensor and control chip, the machine can achieve a constant speed cruise. Whether uphill or downhill, one person can grind by himself. The walking speed can be adjusted freely from 0-25m/min, and different workers can achieve a relatively consistent grinding effect. The climbing ability is not only reflected in the construction but also solves the transportation problem of the heavy grinder. HTG-800-4A can easily overcome the difficulties of other similar grinding machines working on slopes. Fujian Xingyi Polishing Machine Co., Ltd's mission is to "make global floor labors to work with health and happiness". Choose Xingyi and embrace technology!