The gear box is a very important machine part in the floor grinder. However, during the use of the machine, the gear box may be damaged due to improper operation by the operator or due to improper maintenance. The use of the entire floor machinery and the effect after ground construction. Therefore, Guangzhou Meishi Machinery will list a few items that you should pay attention to when using floor grinders.

       1. All gearboxes must be replaced with gear oil after 1000 hours of use for the first time, and every year thereafter. Symptoms: The internal organs of the gearbox require a running-in process during the first use, so iron fragments are generated.

   2. All gearboxes should be handled with care when replacing grinding discs and handling;

   3. All gearboxes should be handled with care after each work;

  4. All gearboxes must be cleaned after each work is completed, with clean water; (It can extend the service life of the machine and the oil seal)

   5. It is necessary to check whether the oil level of the gear box is normal, and if it is not enough, add it in time; (detection of available oil stick)

  6. If the gearbox has abnormal noise, stop using it immediately and check the reason. If you continue to use it, other pinion parts will be damaged.

  The gearbox is a very important part of the floor grinder, so it needs frequent maintenance. Once the gearbox has a problem, you must find the cause and solve it immediately. In this way, the service life of the floor grinder will be longer, and the ground construction effect will be better.